Altec Recalls

Hazard: A broken side plate may result in pedestal and truck frame separation, increasing the risk of injury.

Hazard: Overload of the front axle capacity could cause it to fail and instability, increasing the risk of injury.

Hazard: A loss of lower boom support during operation could cause the lower boom to fall, increasing the risk of injury.

Hazard: A loss of stability during operation could cause the crane to fall, increasing the risk of an injury.

Hazard: Hydraulic hoses that overheat can increase the risk of a fire.

Hazard: An engine shutdown increases the risk of a crash.

Hazard: A brake fluid leak can cause brake failure, increasing the risk of a crash. A fuel leak in the presence of an ignition source can increase the risk of a fire.

Hazard: A/C hoses that overheat can increase the risk of a fire.

Hazard: Lights that fail to illuminate can reduce the vehicle's visibility to other drivers, increasing the risk of a crash.

Hazard: Uncontrolled movement of the boom can increase the risk of injury.

Hazard: A short circuit increases the risk of a fire.

Hazard: Loose fasteners can allow the welder to detach from the vehicle, becoming a road hazard and increasing the risk of a crash.

Hazard: Gearbox failure may result in unexpected turntable rotation, increasing the risk of injury.

Hazard: An uncontrolled load falling increases the risk of injury to personnel or others nearby.

Hazard: Without a circuit breaker, the AC circuit may overheat, increasing the risk of a fire.

Hazard: An outlet without GFCI protection may fail to shut off electrical power when a ground-fault occurs, increasing the risk of injury or fire.

Hazard: Failure of the load-holding feature can result in unintended movement of the platform or load, increasing the risk of injury.

Hazard: U-bolt detachment can result in a loss of vehicle handling and control, increasing the risk of a crash.

Hazard: An active braking system that fails to activate as intended increases the risk of a crash.

Hazard: An electrical short-circuit can increase the risk of a fire.

Hazard: Lifting loads above the boom capacity could overload the unit and cause instability, increasing the risk of injury.

Hazard: An auger extension bar that detaches while the digger drive unit is deployed, can increase the risk of injury to nearby personnel.

Hazard: A missing weld on the rear pole rack can lead to a crack that could cause the pole and rack to drop in height, increasing the risk of an injury.

Hazard: An incorrect bolt in the derrick rotation bearing may cause the adjacent bolts to be overloaded during operation, which could cause separation of the rotation bearing, and increase the risk of an injury.

Hazard: Outriggers that are not set when loads are being lifted by the jib winch may cause the unit to tip, increasing the risk of injury.

Hazard: A cracked weld may allow the auger bracket to detach from the boom, increasing the risk of injury.

Hazard: A blown fuse can cause an engine stall, increasing the risk of a crash.

Hazard: An overloaded electrical circuit can increase the risk of a fire.

Hazard: A nonfunctional overload protection system may result in the operator unknowingly overloading the system, increasing the risk of injury.

Hazard: Unsecured fuel lines may become damaged and leak fuel, increasing the risk of a fire.