Implant Direct Sybron Manufacturing Recalls

Hazard: The Drill stop kit contains incorrect components.

Hazard: Non-engaging abutments were distributed without FDA clearance; the performance characteristics have not yet been adequately established.

Hazard: Packaged dental implant contains a different size then the size declared on the labeling.

Hazard: Packaged dental implant contains a different size then the size declared on the labeling.

Hazard: Through a customer complaint and and internal investigation it was determined that some implant packages contain the incorrect cover screw and extender. This could result in delay in surgery and/or a potential new surgical procedures to place the correct parts. The level of severity varies based on a one or two stage surgery.

Hazard: Due to a complaint received and internal investigation it was determined that implant vials were distributed with incorrect color coded vials and caps. The part/lot numbers were correct, the customer received the product they ordered, however the color on the vial label and cap labels were incorrect.Specifically, the color coded vial and cap does not match the implant size described on the vial. As a result of the incorrect color on the vial and cap, the surgeon may not be certain if the implant received was the correct size. This could result in a delay in surgery, risk of infection if the surgical site has to be closed up and a second round of anesthesia.

Hazard: Some dental implant packages contain incorrect implants, which could lead to surgery rescheduling.

Hazard: The peek part was loose on the titanium base of the device which could result in it falling into a patient's mouth during a procedure resulting in aspiration or ingestion.

Hazard: The peek part was loose on the titanium base of the device which could result in it falling into a patient's mouth during a procedure resulting in aspiration or ingestion.

Hazard: A QA inspection confirmed that a Healing Collar (Part number 8735-15) was packaged instead of the Implant ordered.

Hazard: packaging error; An internal QA inspection revealed that a incorrect healing collar could have been packaged in an implant assembly kit.

Hazard: The action is being initiated due to incorrect assembly of the scan adapter . The result of the incorrect assembly could cause the clinician not to be able to capture the position and orientation of a dental implant(s) or lab analog during the digital scanning process which could result in a delay for the patient.

Hazard: Two units in distribution were found to be mislabeled on the vial cap with the incorrect part number.

Hazard: The incorrect device was packaged in the vial.

Hazard: Cap may be mislabeled with incorrect part number, although the correct part number is on the main vial label.

Hazard: The main vial label lists the incorrect part number, but the cap label is correct.

Hazard: Due to out of specification, the clinician would not be able to fit and engage the abutment with the implant

Hazard: The vial cap was mislabeled with the incorrect part number of 855708 but the product description on the cap was correct. The main vial label was correctly labeled.

Hazard: The cap on the vial might be labeled with the incorrect part number but the main vial label is correct.

Hazard: The extender that is packaged with the SwishTapered" and SwishPlus" Implant may have been packaged in the incorrect position (upside down in the plastic retainer).

Hazard: The extender that is packaged with the SwishTapered" and SwishPlus" Implant may have been packaged in the incorrect position (upside down in the plastic retainer).

Hazard: InterActive Healing Collar, Lot Number 104203, labeled as sterile with distributed prior to being sterilized.

Hazard: The Spectra System/Legacy Guided Surgery Handle Kit had guided handle inserts that were out of Implant Direct specifications, from the results of complaints submitted by clinicians regarding the 3.4mm guide insert that will not allow the 3.4 drill to pass through, since the diameter is too small. In addition, the 2.3mm guide was too large.

Hazard: One reported complaint and discovered that the outer vial was out of round and undersized. Therefore a portion of the opening may not allow inner vial and components to slide freely out of the vial. As a result, the cap could possibly not be screwed on properly and the sterilization compromised.

Hazard: The Swish Duo-Grip Healing Collar part number 9048-13H (4.8mm) package contained a 9037-13H (3.7 mm) component.

Hazard: The inside diameter of the 2.3mm small drill guide inserts have a smaller diameter than the specifications require.

Hazard: Implant Direct Sybron Manufacturing is recalling the Legacy Full-Contour Abutment 3.5mmD Assembly because it may be out of Implant Direct specification.

Hazard: The extender product code (9037-03) that is packaged with the SwishTapered (Part Number 933308; Lot Number 73241) Implant was packaged in the incorrect position. This discrepancy may lead to the possibility of extender not seating properly on the implant, which may lead to micro-leakage and a possible infection to the patient.

Hazard: Consignees received product 6060-62, Replant Overdenture Abutment with the label for 4500-61 GoDirect Screw-Retaining Top.

Hazard: Issue with design specification; oversized condition.