Appliances Recalls

Hazard: The recalled thermostat's floor sensor or its cable can be damaged from cutting, drilling, or nailing. This poses a risk of electric shock to consumers if the power supply is not disconnected.

Hazard: An electrical connector can overheat, posing a fire hazard to consumers.

Hazard: The bump action trigger on the framing nailers could have been incorrectly assembled during production, which would allow the nailer to eject a fastener unexpectedly or cause the trigger lock-off not to function. This can pose a serious injury hazard to the user or bystander.

Hazard: An electrical component failure inside the heat guns can cause them to continue to produce heat after the power switch is turned off. This can melt the heat gun's plastic exterior, causing a burn if the heat gun is touched and ignite nearby combustibles, posing fire and burn hazards.

Hazard: The refrigerator's doors can detach, posing an injury hazard to consumers.

Hazard: The toaster oven can remain "on" after the toast pops up, posing a fire hazard.

Hazard: The controller of the freezer is incompatible with the unit and can overheat and melt the relay, posing a fire hazard.

Hazard: The recalled cleaners' wiring can overheat, causing electrical arcing and melting. This poses a burn hazard to consumers.

Hazard: Electrical connections in the toaster oven/broilers can become loose, posing electrical shock and burn hazards.

Hazard: The defective radio transmitters can cause model airplanes and helicopters they control to fall from the sky while in flight and crash into bystanders or property. The propellers can also spin unexpectedly injuring a person standing too close or working on the aircraft. This poses impact and laceration hazards to consumers and a risk of property damage.

Hazard: The vacuum's battery can expand and burst, posing a risk of injury to the user and bystanders.

Hazard: An electrical failure in the relay, the component that turns on the refrigerator's compressor, can cause overheating and pose a serious fire hazard.

Hazard: The handlebar stems can crack or break, posing a fall hazard to the consumer.

Hazard: A tight valve attached to the stove's fuel source can allow gas to leak, posing a fire hazard to consumers.

Hazard: Gas could flow at a rate that would produce higher than expected flames. Rainwater in the burners can also prevent proper ignition and allow gas to build-up and ignite unexpectedly. These conditions pose burn hazards to consumers.

Hazard: A child's head could get entrapped in the canopy's window openings, posing entrapment and strangulation hazards.

Hazard: If the furnace is not properly wired, the oil burner can continue to operate when the blower shuts off, posing a fire hazard to consumers.

Hazard: An electrical component in certain model dishwashers can overheat, posing a fire hazard to consumers.

Hazard: Wiring inside the toaster can become loose and contact the toaster body, posing a shock hazard to consumers.

Hazard: Direct contact with this substance can cause burns to consumers' skin and eyes. The product lacks required special packaging and warning label.

Hazard: The mounting hardware securing the fuel pump can allow fuel to leak, posing a fire hazard to consumers.

Hazard: The blower's impeller, which is a rotating component on the blower, can break, resulting in pieces of plastic flying out of the blower. This poses a risk of serious injury to the user or a bystander.

Hazard: The jackets have drawstrings through the hood and at the waist. Children can get entangled in the drawstrings that can catch on playground equipment, fences or tree branches.

Hazard: The extreme heat used in the self-clean cycle can escape, if the wall oven door is removed and incorrectly re-attached by the installer or the consumer. This can pose a fire and burn hazard to consumers.

Hazard: The two-piece fuel tanks on the riding mowers can separate at the seam, causing fuel to leak. This can pose fire and burn hazards to consumers.

Hazard: The automatic gas vent damper could fail, and if the blocked vent switch does not activate, the vent could leak carbon monoxide (CO). This poses a risk of CO poisoning to consumers.

Hazard: The boiler can leak gas, posing a fire hazard to consumers.

Hazard: An electrical short circuit can occur between the heating element and the bread cage, posing a fire and electrical shock hazard to consumers.

Hazard: The fryers can overheat, posing a burn hazard.

Hazard: The pressure switch could have an internal defect that could fail to shut down the boilers under vent or air inlet blockage. This switch defect could allow the boilers to produce excessive levels of carbon monoxide, posing a risk of carbon monoxide poisoning to consumers.