Bikes & Recreational Vehicles Recalls

Hazard: The hub flange ring on the front hub can fail posing a crash and injury hazard.

Hazard: The handlebars can loosen or separate during use. This can cause the rider to lose control and/or crash, posing the risk of injury.

Hazard: The engine can lock up during operation, causing a rider to lose control of the vehicle and crash, resulting in injuries and death.

Hazard: The anchor for the helmet's chinstrap can fail, causing the helmets to slide off the head, posing a head injury hazard. The bicycle helmets also do not comply with the impact requirements of the CPSC safety standards for bicycle helmets.

Hazard: The bicycle fork can bend or break, posing a fall hazard to the rider.

Hazard: The frame of the bicycle could break, causing the rider to lose control, fall and suffer injuries.

Hazard: The latch pin can disengage from the latch and allow the door to open while the vehicle is moving, posing a risk of ejection of an unrestrained rider and impact or laceration hazards.

Hazard: The shock absorber is marked with graphics that incorrectly identify the adjustment directions for High Speed Rebound (HSR) damping. Following these directions will cause unexpected behavior by a bike's suspension and pose a fall hazard to a rider.

Hazard: Components in the front gear case can fail, posing a risk of loss of control and crash hazard.

Hazard: Incorrect parking brake adjustments and improperly bled brake lines can diminish a consumer's braking ability, posing a crash hazard.

Hazard: Oil can leak from the oil cooler lines, posing a fire hazard.

Hazard: Fuel hose joint can leak during operation, posing a fire hazard.

Hazard: The bicycle front fork can crack, posing a fall hazard.

Hazard: Fuel can leak from the fuel line assembly, posing a fire hazard.

Hazard: The vehicle's floor boards can allow a stick or other debris to break through and protrude into the foot rest area, posing an injury hazard to the operator and front passenger.

Hazard: The brakes can fail to stop riders within the distances required by federal regulation, posing a crash hazard.

Hazard: The wheel hubs can break and cause the brake system to fail, posing crash and injury hazards to the consumer.

Hazard: The front fork can break, posing a crash hazard.

Hazard: The bike's frame can crack at the hinge on the top tube, posing a fall hazard.

Hazard: The steerer tube in the front fork can break, posing a fall hazard.

Hazard: The bicycle forks can crack or break above the brake mount posing a fall hazard to consumers.

Hazard: The bicycle fork can break and cause the riders to lose control, posing a risk of injury.

Hazard: The camshaft sprocket bolts can loosen and come off causing the engine to lock and stop the vehicle, posing a crash hazard.

Hazard: Children can get entangled in the electrical cord that hangs from the children's wall-mounted lamps, posing a strangulation hazard.

Hazard: The steer tube on the bicycle fork can break and cause the rider to lose control, posing a risk of injury.

Hazard: The pajamas fail to meet the federal flammability standards for children's sleepwear, posing a risk of burn injury to children.

Hazard: Fuel can leak from the fuel fitting at the throttle body of the vehicle, posing a fire hazard.

Hazard: The brake cable actuator arm can over-rotate, dislocating parts, causing the brake calipers to fail. Lack of brakes results in loss of control and a crash hazard, posing a risk of injury to the rider and others

Hazard: The off-road motorcycle's drive chain can detach and cause the rider to lose control, posing a crash hazard.

Hazard: Fuel can leak from between the fuel tank and fuel tap, posing a fire hazard.