Bikes & Recreational Vehicles Recalls

Hazard: The head tube can separate from the frame, causing the rider to lose control and fall. This poses a risk of serious injury.

Hazard: Electrostatic changes can accumulate and spark in the fuel tank when the engine is left idling, posing an explosion hazard that could result in serious injuries or death.

Hazard: If the fixing bolt is over-tightened on the non-drive crank arm, the bolt shoulder can crack or break. If this occurs, the non-drive arm can fall off the bicycle causing the rider to crash and suffer injuries.

Hazard: The frame can crack at the junction of the seat post and top tube, posing a fall hazard to riders.

Hazard: The carbon top clamp of the seat post can crack, posing a fall hazard to the user.

Hazard: The cable clamping area of the bicycle brakes can crack over time, causing the brakes to fail. This could pose a fall or crash hazard to the cyclist.

Hazard: Incorrectly assembled trampolines can allow the top rails and legs to bend or break during normal use, resulting in partial collapse of the trampoline. This poses a fall hazard to consumers.

Hazard: The custom footrests can break, posing a risk of injury to the rider.

Hazard: A faulty housing for the ignition switch can allow water to enter and activate the electric starter unintentionally. This poses a serious hazard of injury or death.

Hazard: The gas cap can leak or detach from the fuel tank on the recalled mini bikes and go-carts, posing a fire and burn hazard to consumers. In addition, the throttle can stick due to an improperly positioned fuel line and throttle cable, posing a sudden acceleration hazard to consumers.

Hazard: The bicycle fork's legs can separate from the fork crown and cause the rider to lose control, posing a fall hazard and risk of injury.

Hazard: The flame arrester screen can become detached from its mounting ring, preventing the throttle valve from returning to the idle position when the throttle lever is released and causing the rider to lose control of the ATV. This poses a serious hazard of injury or death.

Hazard: The bicycle's front fork can crack or break, causing a sudden loss of steering control and posing a fall hazard to bicyclists.

Hazard: The bicycle's fork steer tube can break, causing the rider to lose control, fall and suffer injuries.

Hazard: Friction between the fuel hose and the electronic control unit can cause the fuel hose to wear and leak fuel, posing a fire hazard.

Hazard: The screw(s) in the hitch can become loose and fall off due to vibrations when items are being towed, allowing the sled and hitch to detach from the towing vehicle. This poses an injury hazard to the user and bystanders.

Hazard: A welding deficiency can cause the bicycle frames to crack along the welds of the front triangle of the bicycle. This can cause the rider to lose control and crash.

Hazard: The bicycle stem on the handlebars can crack and cause the rider to lose control, posing a risk of serious fall and injury.

Hazard: The shock absorber mount can break and the shock absorber can make contact with the wheel spokes, posing a fall hazard to the rider.

Hazard: The steering column support assembly can crack and cause the rider to lose steering control, posing a risk of injury or death to riders.

Hazard: The drive pulley bolts on the snowmobiles can break due to oil contamination during the assembly process. This can cause debris to come off the vehicle and act as projectiles, posing a laceration hazard to riders or bystanders.

Hazard: The bicycle fork can crack or break, posing a fall hazard to the consumer.

Hazard: The two rubber hand grips on the aerobars (handle bars) can loosen or slip off during use, posing a fall or injury hazard to the rider.

Hazard: The red paint on the bicycle bells contains excessive lead levels, violating the federal lead paint standard.

Hazard: Fuel can leak from the fuel pump at the fuel tank mounting screws, posing a fire hazard to consumers.

Hazard: A bolt in the right front A arm can loosen in the suspension/steering system, resulting in the sudden loss of steering control. This poses a risk of injury or death to riders.

Hazard: The bicycle's fork legs can separate from the fork crown and cause the rider to lose control, posing a risk of serious injury if the rider falls.

Hazard: The front suspension ball joint stem can separate from the steering knuckle and cause the rider to lose steering control, posing a risk of injury or death to riders.

Hazard: The pressurized cartridge containing carbon dioxide (CO2) can forcefully separate from the pump head, posing a risk of injury to the consumer.

Hazard: The dynamic power steering can fail, resulting in the sudden loss of steering control. This poses a risk of injury or death to riders.