Bikes & Recreational Vehicles Recalls

Hazard: An improperly routed alternator cable can become damaged and contact the negative battery post, resulting in an electrical short, posing a fire hazard and risk of serious injury.

Hazard: The bicycle frame can develop a hairline fracture near a weld, which can cause the tubes to separate, posing a risk of falling.

Hazard: A defect in the wheel can compromise the wheel's structural integrity, posing a crash hazard.

Hazard: The e-bikes' lithium-ion battery can overheat and ignite, posing serious fire and burn hazards to consumers.

Hazard: The fork steerer tube on the recalled bicycles can crack, break or separate during use, posing a fall hazard.

Hazard: When the lower portion of the e-bike's telescopic seat post is fully extended, the seat post can break, posing a fall hazard.

Hazard: The lower seat belt anchor fasteners were not properly tightened, which can result in the seat belt separating from the vehicle frame, failing to protect riders. Without that protection, riders can be ejected from the vehicle in a crash, posing an injury hazard.

Hazard: The front brake caliper can crack, reducing the braking system's effectiveness, posing a crash hazard.

Hazard: The primary gear for the crank shaft can fail, posing a crash hazard.

Hazard: The portable fuel containers violate the child-resistant requirements for closures under the Children's Gasoline Burn Prevention Act. The closure for the product is not child-resistant, posing a risk of burn, fire and poisoning to children and the risk of serious injury and death.

Hazard: The recalled youth ATVs fail to comply with the requirements of the federal mandatory ATV safety standard. The handlebars pose a laceration hazard if the child rider's body or head impacts the handlebars at a high rate of speed. Additionally, the parking brakes fail to hold, posing a collision hazard. ATVs that fail to meet the mandatory safety requirements pose a risk of serious injury or death.

Hazard: The fasteners on the vehicle's rollover protective structure (ROPS) pillar joints can be missing or loose and fail to protect the occupants, if the vehicle rolls over or tips over. This poses an injury hazard.

Hazard: The recalled accessory heaters can overheat and catch fire, posing fire and burn hazards to consumers.

Hazard: The bike's protective chain/belt guard does not cover the belt drive and loose clothing can get entrapped in the belt drive, posing a fall hazard.

Hazard: The folding mechanism can fail and cause the handlebars or stem to fold while the scooter is in use, posing a fall hazard to consumers.

Hazard: The engine control module (ECM) lower mount support could have broken in production and left a loose part inside the engine compartment, allowing it to enter the throttle body area and lead to a stuck throttle. This poses a crash hazard and risk of serious injuries or death.

Hazard: The fork steerer tube on the recalled bicycles and framesets can crack, break, or separate during use, posing a fall hazard.

Hazard: The aerostem fork steerer tube on the recalled bicycles can crack or break, posing fall and injury hazard.

Hazard: The retaining pin in the e-bike's disc brake calipers can loosen and dislodge from the caliper assembly, resulting in brake failure, posing crash and injury hazards to the rider.

Hazard: The right-hand plastic switch cube can crack when exposed to brake fluid, causing a short circuit that starts the motorcycle unexpectedly, posing an injury hazard.

Hazard: The rear fender can come loose and can contact the rear wheel and stop the bike unexpectedly, causing the rider to lose control of the bike, posing a crash hazard.

Hazard: The helmets do not comply with the positional stability, impact, labeling and certification requirements of the mandatory federal safety regulation for bicycle helmets. The helmets can fail to protect the wearer in the event of a crash, posing a risk of head injury.

Hazard: The door handle can stick and cause the door to unexpectedly open while the vehicle is moving and cause an unrestrained rider to be ejected from the vehicle or increase the risk of a crash, posing serious injury and crash hazards.

Hazard: The helmets do not comply with the positional stability, impact labeling and certification requirements in violation of the CPSC federal safety regulation for bicycle helmets. The helmets can fail to protect in the event of a crash, posing a risk of head injury.

Hazard: The positive (+) battery terminal cover (red) can become damaged by the seat base, causing the positive (+) battery post to be exposed and contact nearby conductive components, resulting in an electrical short, posing a fire hazard.

Hazard: The vehicles' passenger side seat belt anchor point can separate from the frame due to a defective weld on the bracket, posing an injury hazard to passengers from impact with a loose bracket or failure of the seatbelt during a crash.

Hazard: The front fork of the recalled KickScooters can break, posing fall and injury hazards to the rider.

Hazard: The crank can break, due to fatigue fractures, causing the rider to lose control, posing fall and crash hazards.

Hazard: The high voltage cables on the motor controller unit can be loose, causing the cable to arc or overheat while in use, posing fire and crash hazards and risk of serious injury.

Hazard: The recalled ATVs fail to comply with the requirements of the federal mandatory ATV safety regulations. The youth ATVs' mechanical suspension fails to comply with safety requirements, posing a crash hazard. The adult ATVs' service brakes fail to sufficiently stop the vehicle, posing a crash hazard, and the handlebars pose a laceration hazard if the adult rider's body or head impacts the handlebars. ATVs that fail to meet the mandatory safety regulations pose a risk of serious injury or death.