Diving Equipment Recalled by Dive Rite Due to Drowning Hazard

Recalled December 22, 2009 · CPSC recall 10086 · Diving

Hazard

The overpressure valve springs in the diving equipment could rust and fail allowing the buoyancy compensator devices to leak, posing a drowning hazard to divers.

Remedy

Consumers should immediately stop using recalled diving equipment and return it to an authorized distributor or dealer for a free replacement of the overpressure valve spring.

Units

About 16,000

Incidents / injuries

None reported.

Description

The Dive Rite Wings affected in this recall include the following models: Travel, Venture, Rec, Trek, Classic, Nomad and Super Wings. The wings were sold in red, blue or black. Springs were used on wings that have an opaque white or blue tinted bladder and welded in flanges. Wings with a black bladder are not affected. Only the Dive Rite wings that have a serial number range from 42000 through 72000 are affected by this recall. The serial numbers can be found on a white tag attached along a seam of the wing.

What to do

Consumers should immediately stop using recalled diving equipment and return it to an authorized distributor or dealer for a free replacement of the overpressure valve spring.

Contact

For additional information, contact your local dealer or Dive Rite at (800) 495-1046 between 9 a.m. and 4 p.m. ET Monday through Friday or visit the firm's Web site at www.diverite.com

Product

Dive Rite Wings

Manufacturer(s)

Lamartek Inc., dba Dive Rite of, Lake City, Fla.

Retailers

Diving equipment retailers and distributors nationwide from June 2006 through October 2008 for about $359.

Made in

United States

Source: U.S. Consumer Product Safety Commission. Official recall notice on cpsc.gov →