RecallWatchUSA

Home / Recalls / Other

Safety Alert: Robert Bosch Tool Corp. Abrasive Cut-Off Wheels Lack Safety Warning Label

Recalled June 9, 2006 · CPSC recall 06184 · Safety

Abrasive Cut-Off Wheel
Hazard
The Abrasive Cut-Off Wheel packages are not properly labeled with precautionary information on proper use and operation. The failure of a user to follow the instructions below could result in injury. "! WARNING Read, understand and comply with tool manual before use. Follow OSHA and ANSI B7.1 standards. Use eye, face, dust and ear protection. Wear body apron and gloves. Speed rating of wheel must be greater than tool speed. Do not grind without guard adjusted for maximum operator protection. Mount wheel with the tool flanges provided. Run-in for one minute before application. Do not jam, twist or pinch wheel in work piece or apply excessive side pressure to the wheel. RECOIL may occur if wheel is jammed. Do not use near flammable materials or gases; fire or explosion may result. Do not expose to water, condensation or freezing. Discard wheel if dropped, cracked or chipped."
Remedy
Consumers with abrasive cut-off wheels that are missing the safety instructions should contact Vermont American Customer Service to obtain safety warning information.
Units
About 400,000
Incidents / injuries
None reported.

Description

The wheels have a black, abrasive exterior; a red circular label on the interior; and are used to clean, slot, nick and cut metal. The wheels were sold under the "Vermont American" brand name had the following catalog numbers, diameters and blade thickness: Item # Diameter Blade Thickness 28026 6-1/2" 1/8" 28027 7"-7-1/4" 1/8" 28028 8" 1/8" 28030 10" 1/8" 28032 12" 1/8" 28033 14" 1/8"

What to do

Consumers with abrasive cut-off wheels that are missing the safety instructions should contact Vermont American Customer Service to obtain safety warning information.

Contact

Call Robert Bosch Tool Corp. at (800) 742-3869 between 7 a.m. and 7 p.m. CT Monday thru Friday.

Product
Vermont American® Abrasive Cut-Off Wheels
Manufacturer(s)
Robert Bosch Tool Corp., Mt. Prospect, Ill.
Retailers
Industrial distributors nationwide from January 2001 through September 2005 for between $5 and $15.
Made in
Canada

Source: U.S. Consumer Product Safety Commission. Official recall notice on cpsc.gov →