Consumer Product Recalls

Hazard: Trailer tail lights and turn signals that do not illuminate as intended can reduce visibility to other drivers, increasing the risk of a crash.

Hazard: A door that cannot be opened from the inside may trap occupants, increasing the risk of injury.

Hazard: A fuel leak in the presence of an ignition source increases the risk of a vehicle fire.

Hazard: The recalled dressers are unstable if they are not anchored to the wall, posing tip-over and entrapment hazards that can result in serious injuries or death to children. The dressers fail to meet the mandatory standard required by the STURDY Act.

Hazard: The recalled baby loungers violate the mandatory standard for Infant Sleep Products. The sides are too low to contain an infant. The sleeping pad is too thick, posing a suffocation hazard. The enclosed openings at the foot of the loungers are wider than allowed, posing a fall hazard and an entrapment hazard to infants. Also, the baby loungers do not have a stand, posing a fall hazard if it is used on elevated surfaces. These violations create an unsafe sleeping environment for infants and can cause death or serious injury to infants. In addition, the recalled baby loungers come with crib bumpers, which are banned by the Federal Safe Sleep for Babies Act because the padded crib bumpers can obstruct breathing, posing a risk of serious injury or death to infants from suffocation.

Hazard: The recalled kids' helmets violate the mandatory safety standard for bicycle helmets because the helmets do not comply with the impact attenuation, positional stability, labeling and certification requirements. The helmets can fail to protect the user in the event of a crash, posing a serious risk of injury or death due to head injury.

Hazard: The recalled toys violate the mandatory standard for toys containing button batteries because the compartment that holds the batteries in the remote can be accessed without the use of a common household tool. If button cell or coin batteries are swallowed, the ingested batteries can cause serious injuries, including internal chemical burns and death.

Hazard: The internal lithium-ion battery can overheat, produce smoke, and/or eject material, posing fire and burn hazards.

Hazard: The heating element can cause sugar to ignite, if a consumer uses the product without the included sugar receptacle, posing a fire hazard.

Hazard: The misting fan can overheat while charging and ignite, posing a fire hazard.

Hazard: Alcohol fuel can splash or leak out of the fire pit reservoir during use and/or ignition, causing a flash fire that can spread and create larger hotter flames that can escape the unit, presenting risk of serious burn injury from flame jetting and fire hazards.

Hazard: Failure of fusion system instruments in the field.

Hazard: Failure of fusion system instruments in the field.

Hazard: A 37 mm implant width intervertebral body fusion device has a labeling discrepancy with incorrect width of 33 mm stated on the outer label side flap and inner label side flap information box. The 37 mm width on the front labels is correct.

Hazard: Inserter, used as part of a system with an intervertebral body fusion device, may contribute to difficulty disengaging the implant or improper implant positioning, which may may lead to prolonged surgery, intraoperative revision, and may require the use of alternate instrumentation. Devices may also have incorrect UDI-DI marking.

Hazard: Due to a manufacturing issue involving the silicone quad ring where the ring is deformed or otherwise damaged and may cause a foreign body in the fluid pathway.

Hazard: Measles IgM Test Kit lacks premarket approval or clearance.

Hazard: Certain desiccant tube subassemblies were built with end caps that were not correctly tightened.

Hazard: Certain desiccant tube subassemblies were built with end caps that were not correctly tightened.

Hazard: Their is a potential that the reamer may kick or bind up during or immediately prior to use.

Hazard: Their is a potential that the reamer may kick or bind up during or immediately prior to use.

Hazard: Their is a potential that the reamer may kick or bind up during or immediately prior to use.

Hazard: Their is a potential that the reamer may kick or bind up during or immediately prior to use.

Hazard: Dipstick strep A test has potential for false positive results.

Hazard: Replacement of the internal Sample Pump due to high failure rates.

Hazard: Software issue that results in the display of outdated information.

Hazard: Potential for falsely depressed patient, quality control (QC), and/or calibration results or delayed results.

Hazard: Some modular LinkSymphoKnee TiNbN Tibial Components were manufactured with two uncoated security screws, which is incorrect.

Hazard: Retroactive; Due to complaints, labeling correction for permanent tissue-integrating surgical matrices to include prevention and management of would dehiscence.

Hazard: The Encore 26 Inflation Device is used with balloon dilation catheters to create and monitor pressure in the balloon and to deflate the balloon. An internal investigation determined that during use, foreign material particles could migrate from affected Encore 26 Inflation Devices into a balloon dilatation catheter.