Consumer Product Recalls

Hazard: The main switch on the recalled chainsaws and pole saws can fail, allowing the saws to continue to run even after the switch is released, posing a laceration hazard.

Hazard: The fuel gas valve can open unexpectedly, allowing a gas leak and posing a fire hazard.

Hazard: The recalled drain covers do not conform to the entrapment protection standards of the Virginia Graeme Baker Pool and Spa Safety Act (VGBA), posing an entrapment hazard to swimmers and bathers.

Hazard: The ceramic cloth abrasive flaps on the disc can detach while in use on a grinder, posing laceration and injury hazards.

Hazard: The wires in the power station's AC outlet receptacles are reversed when the product is in Emergency Power Supply ("EPS") mode, posing a shock hazard to consumers operating the power station.

Hazard: Devices with affected software may experience two unintended motion issues that may lead to contact between the Gantry or table with the operator or patient, along with additional software issues that affect CT performance.

Hazard: The 8-inch model of the Jewel Precision Reusable Rigid Sterilization Container System (i.e., model number: JP-24-8) was not cleared by the FDA. The letter to file justifying the change in size was insufficient.

Hazard: GE HealthCare has become aware that the Estimated Fetal Weight (EFW) measurement data feature on the Versana Premier R3 and LOGIQ F R3 series ultrasound systems can display previous obstetric patient data in the Whizz report. This could potentially lead to an incorrect clinical decision due to inaccuracy in the fetal size and growth calculation.

Hazard: GE HealthCare has become aware that the Estimated Fetal Weight (EFW) measurement data feature on the Versana Premier R3 and LOGIQ F R3 series ultrasound systems can display previous obstetric patient data in the Whizz report. This could potentially lead to an incorrect clinical decision due to inaccuracy in the fetal size and growth calculation.

Hazard: Due to a software issue, the software may incorrectly process the date of birth (DoB) received from the Laboratory Information System (LIS) and when the DoB is set to 01/01/1900 or left empty, REMISOL Advance may incorrectly identify a patient as a newborn, affecting the execution of validation rules based on incorrect reference ranges. The test results are not changed by this software defect and are accurately displayed by REMISOL Advance; however, the evaluation flagging of the results may be affected. This issue may lead to wrong reference range calculations and can result in erroneous flagged results being auto validated and uploaded to LIS.

Hazard: Contamination of the diluent by sodium hypochlorite (NaOCl) which may impact calibrator, quality control (QC), and patient results for all assays except for sodium, potassium, and chloride.

Hazard: The Instructions for Use do not match the 510(k) FDA cleared indications for use or sterility shelf life.

Hazard: There is the potential that the eccentrical adaptor with screw, black laser marking, use to identify the position may be missing.

Hazard: There is the potential that the eccentrical adaptor with screw, black laser marking, use to identify the position may be missing.

Hazard: BD has received additional complaints of intermittent false resistance results for PZA during susceptibility testing of Mycobacterium tuberculosis isolates.

Hazard: Due to an error in assembly of the thermistor within some units, the affected probes will experience inaccuracy in measured shunt sensor temperature. Additionally, following changes in patient temperature without an in vivo recalibration, affected probes may experience inaccuracy in other measured parameters, including pCO2, pO2, pH, Potassium and calculated parameters, including BE, Bicarbonate, Arterial Oxygen Saturation, Delivered Oxygen, Area Under of the Curve of Delivered Oxygen, Oxygen Consumption, and Oxygen Extraction Ratio, which utilize temperature as an input. Inaccurate data may lead to inappropriate user response.

Hazard: During automated dispensing cabinet upgrade/installation/reimaging, component manager was left in installed mode, and if a Microsoft patch is then installed this may lead to an error preventing user access to the dispensing software application, which may lead to delay in access to medications/supplies, and delivery/replenishment of patient specific orders; which may lead to delay in patient care.

Hazard: Insulet Corporation is recalling Omnipod 5 iOS App, due to a software design issue in which a comma is not recognized as a decimal separator and the user cannot enter a decimal separator in any manual entry screen if the user manually updates their phone settings to a region OUS that uses a decimal separator instead of a period decimal separator or chooses that format as a preference. Use of the affected software may result in over delivery of insulin by increasing the amount of insulin when a decimal separator is not recognized (e.g., 0.1 unit recognized as 1 unit) and thus may result in hypoglycemia, potentially severe.

Hazard: Out of specification stability test result for the Caphosol B solution from process validation lots

Hazard: Package labeling for Altivate Reverse Torx Peripheral screw contains a different size then actual included product.

Hazard: Package labeling for Altivate Reverse Torx Peripheral screw contains a different size then actual included product.

Hazard: Package labeling for Altivate Reverse Torx Peripheral screw contains a different size then actual included product.

Hazard: Package labeling for Altivate Reverse Torx Peripheral screw contains a different size then actual included product.

Hazard: Due to customer complaints, there is the possibility that catheter needle may be slow to retract or fail to retract.

Hazard: Due to customer complaints, there is the possibility that catheter needle may be slow to retract or fail to retract.

Hazard: Due to customer complaints, there is the possibility that catheter needle may be slow to retract or fail to retract.

Hazard: Due to customer complaints, there is the possibility that catheter needle may be slow to retract or fail to retract.

Hazard: Due to customer complaints, there is the possibility that catheter needle may be slow to retract or fail to retract.

Hazard: Due to customer complaints, there is the possibility that catheter needle may be slow to retract or fail to retract.

Hazard: Due to customer complaints, there is the possibility that catheter needle may be slow to retract or fail to retract.