Bikes & Recreational Vehicles Recalls

Hazard: The metal support legs of the trampoline can bend or break and the bungee cords that secure the mat to the frame of the trampoline can fray or break, posing a fall hazard to the user.

Hazard: The bicycles fail to meet the federal safety standard for bicycles. Spoke protector discs, required on bicycles to prevent the bicycle chain from interfering or suddenly stopping the wheel, are missing from these bicycles. This poses a fall hazard to the rider.

Hazard: The front tray on the bicycle can come loose and contact the front tire, posing a fall hazard to riders.

Hazard: Engine stress could cause the connecting rods to crack and the engine to lock up, posing a crash hazard.

Hazard: The rear brake caliper support can crack and the front brake operation can experience a loss of pressure, posing a risk of the rider losing braking and steering control and suffering injuries or death.

Hazard: The suspension system on bikes with the recalled forks could become completely compressed and fail to return to its original position after a forceful landing. This can cause riders to lose control of the bicycle and crash. The forks can also expand forcefully if repair is attempted by the consumer, posing a risk of serious injury.

Hazard: The spokes on the bicycle's front wheel rim can break during use, posing a fall and crash hazard to riders.

Hazard: The jackets have a drawstring through the hood, which can pose a strangulation hazard to children.

Hazard: This sleepwear fails to meet the federal children's sleepwear flammability standard, and poses a risk of burn injury to children.

Hazard: A handle pin on the bicycle trainer can loosen during use, causing the machine to become disengaged, and pose a fall hazard to consumers.

Hazard: The density of the steerer tubes can cause the forks to crack and break, posing a fall hazard to the consumer.

Hazard: The steel steerer on the forks can crack, causing the fork to detach from the bicycle frame. This can cause the rider to lose control and crash.

Hazard: The front bicycle suspension fork can break, causing the rider to crash.

Hazard: The weld on the right side of the swing arm can fail, causing the rider to lose control and crash. This could pose a risk of injury or death to riders.

Hazard: Rim surface and spoke hole plugs on the wheel can cause a puncture to the inner tube, resulting in a flat tire. This can cause the rider to lose control and fall.

Hazard: If the rider is ejected and the cord strap is pulled, the shutoff switch can fail to disable the engine. The ATV can operate uncontrolled, until the engine returns to idle, and cause a collision with bystanders, vehicles or other objects. This poses a serious risk of injury.

Hazard: Cracks can develop in the welded joints of the drive axle assembly of the snowmobile and can result in complete breakage. If this happens, the track of the vehicle can unexpectedly lock, causing riders to be ejected off the vehicle or lose control and collide with bystanders, a fixed object or other vehicles. This poses a risk of serious injury or death.

Hazard: The undersides of the foot platforms can have sharp edges, posing a laceration hazard to children.

Hazard: The fuel tank can leak from a gap in the seam at the base of the filler neck, posing a fire hazard.

Hazard: The top of the bicycle handlebar stem can crack and cause the rider to lose control, posing a crash hazard.

Hazard: The fork's steerer can break during normal use, causing the rider to lose control, fall and suffer serious injuries.

Hazard: The interior alignment tabs of the bicycle's chainguard can be pushed against the chain causing it to derail, which poses a risk of injury to riders.

Hazard: The steel axle inside the pedal can break, posing a fall hazard to cyclists.

Hazard: The interior alignment tabs of the bicycle's chainguard can be pushed against the chain, causing it to derail, which poses a risk of injury to riders.

Hazard: If the ATV's rubber CV (constant velocity) boots get punctured or torn the joint will become contaminated and severe binding of the CV joints could occur, resulting in the sudden loss of steering control. This poses a risk of injury or death to riders.

Hazard: The youth ATV lacks front brakes, a manual fuel shut-off, and padding to cover the sharp edges on the handlebar assembly. Additionally, the vehicle is sold without a tire pressure gauge or adequate flag pole bracket. The defects could lead to young drivers losing control of the ATVs, which poses the risk of serious injuries or death.

Hazard: Cracks could form in the starter ring-gear and cause the ring-gear to fracture into several pieces. The broken pieces could be propelled out of the chassis of the machine at high speed, causing serious injury or death to the rider and/or bystanders.

Hazard: A manufacturing defect in the carburetor can cause the throttle to stick open, posing a risk of serious injury or death to the rider.

Hazard: The throttle can fail to return to the idle position when released or could fail to be at idle on start-up. This could result in loss of vehicle control, posing a risk of serious injury or death to the rider.

Hazard: The speed controller on the recalled ATVs could fail to return to the idle position when the throttle lever is released, or the speed controller could fail to be at idle on start up. This could result in loss of vehicle control, which could result in serious injury or death to the rider.