Bikes & Recreational Vehicles Recalls

Hazard: The utility vehicle's throttle cable can freeze in freezing temperatures. This can cause the engine not to return to idle when the driver takes his or her foot off the accelerator pedal.

Hazard: Some of the bolts included in the clamp kits (or sold separately) if installed incorrectly can break under extreme force such as a crash. This can cause the handlebars to separate posing a risk of serious injury to the rider.

Hazard: Friction between the fuel hose and the cylinder head cover can cause the hose to pierce. This can cause fuel to leak out, posing a fire hazard.

Hazard: Excessive heat can cause the wiring harness to melt. This defect can result in a fire hazard to consumers.

Hazard: The ATVs can have defective Electronic Control Modules (ECM) that overheat, posing a fire and burn hazard to riders.

Hazard: Under extreme cold and dry weather conditions, an explosion could occur because of sparking in the fuel tank, when it is partially filled with gasoline at a low vapor pressure and the engine is left idling. This could cause serious injuries or death.

Hazard: The springs in the resistance trainers can unhook and become a projectile, posing a puncture hazard to users or bystanders.

Hazard: The springs in the resistance trainers can unhook and become a projectile, posing a puncture hazard to users or bystanders.

Hazard: The electric power steering shaft of the recalled ATVs could break unexpectedly, resulting in the rider's losing steering control. This poses a risk of injury or death to riders.

Hazard: The brake caliper on the left front wheel could have been made incorrectly, resulting in brake fluid leaking. This can cause a loss of braking and control of the vehicle, posing a serious safety risk to the driver and passenger.

Hazard: One or more of the motorcycle's frame welds could be missing or made incorrectly allowing the frame to crack or break, posing a risk of serious injury to riders.

Hazard: A retention bolt can come loose, causing the rear wheels to lock up, which poses a risk of serious injury to the rider.

Hazard: The ATVs can have defective Electronic Control Modules (ECM) that overheat, posing a fire and burn hazard to riders.

Hazard: The bicycle's frame can break during use, causing the rider to lose control and suffer injuries.

Hazard: Water can enter the throttle position sensor and freeze, causing permanent damage if the rider forces the throttle lever. This could cause the throttle to stick open, posing a risk of injury or death to riders.

Hazard: The frame can break while in use, causing the rider to lose control and suffer injuries from a fall or collision.

Hazard: The coupler connecting the children's trailer bike to the adult's bicycle has welds that can fail, posing a fall hazard to children.

Hazard: The pivot bolts holding the rear suspension onto the frame can become loose, causing the rear swing arm to detach from the chassis, posing a risk of injury or death to the operator.

Hazard: A defect in the carburetor can prevent the throttle from freely returning to the idle position. This can result in an unexpected loss of control, leading to a collision, and cause serious injuries or death.

Hazard: The helmets fail testing required under CPSC's safety standard for bicycle helmets. This can pose a head injury hazard to riders in a fall.

Hazard: The utility vehicle's fuel tank can leak, posing fire and burn hazards to consumers.

Hazard: These ATVs lack a tire pressure gauge and flag pole mounting bracket, which could pose a risk of injury to riders.

Hazard: The fuel tank filler neck can crack and separate allowing fuel or fuel vapors to leak from the fuel tank. This poses a fire hazard to consumers.

Hazard: The snowmobiles' fuel tanks can crack allowing liquid fuel and fuel vapor to leak, posing a fire and burn hazard to consumers. In addition, a problem with the throttle cable can lead to loss of speed control, posing a crash hazard.

Hazard: The fork tips could separate from the fork legs, causing the wheel to come loose from the fork while riding. This could pose a serious fall hazard to riders.

Hazard: The rear brake caliper support can crack; this could result in the potential for a loss of the use of the rear brake and subsequently lead to an accident.

Hazard: The brake calipers in the front of the utility vehicles may have been installed incorrectly, causing the vehicle to pull to one side during braking. This poses an injury hazard to consumers.

Hazard: Paint on the clip of the bookmarks contains excessive levels of lead, which violates the federal lead paint standard.

Hazard: The head tube can detach from the rest of the frame, posing a fall hazard to consumers.

Hazard: Snow and ice stuck around the steering idler arm can cause a loss of steering ability, posing a risk of injury and death to drivers and passengers.