Bikes & Recreational Vehicles Recalls

Hazard: The hub in the bicycle's rear wheel can fail to engage properly, causing no resistance when pedaling. The bicycle rider can lose balance, fall and suffer injuries.

Hazard: The hub in the bicycle's rear wheel can fail to engage properly, causing no resistance when pedaling. The bicycle rider could lose balance, fall and suffer injuries.

Hazard: The front and/or rear wheel can collapse, causing the rider to fall and suffer injuries.

Hazard: The rear axle on the bicycle is harder than required by the manufacturer's specification and could crack.

Hazard: A significant impact to the front wheel of the ATV while the steering is fully turned to either side can result in suspension damage, wear, and an eventual loss of steering control, that could result in injury or death.

Hazard: A significant impact to the front wheel of the ATV, while the steering is fully turned to either side, can result in suspension damage, wear, and an eventual loss of steering control, that could result in injury or death.

Hazard: There are three separate issues involved in this safety recall: Front Suspension Spindle - The nut that fastens the upper control arm ball joint to the suspension spindle can loosen. If this occurs, continued operation could allow the spindle to break and release the upper control arm, posing a risk of loss of control of the vehicle. Fuel Tank Chaffing - The fuel tanks can contact the chassis along the bulkheads, leading to wear on the tank walls. This could pose a fuel leakage and possible fire hazard to consumers. Gasket - The gasket sealing the fuel pump assembly to the tank can develop cracks. This poses a risk of fuel leakage and fire hazard to consumers.

Hazard: The centerpiece of these bicycle aero bars can crack or break, causing the bicycle rider to lose control and crash.

Hazard: The rear wheel freehub mechanism can malfunction, causing no resistance when pedaling. The bicycle rider could lose balance, fall and suffer injuries.

Hazard: The aluminum center section of the wheel can come apart, causing the tire and rim to unexpectedly separate from the ATV, posing a risk of serious injury if the rider loses control of the vehicle.

Hazard: The suspension assembly can crack, causing the rider to lose control of the go-kart.

Hazard: The bicycle trailers can become unstable when changing directions, due to incorrectly assembled hitch mechanisms, posing a risk of injury to the riders.

Hazard: A weld can break, causing the handlebar to detach from the scooter. This can cause the rider to lose control and fall from the scooter.

Hazard: A wheel could separate from the go-kart, posing a roll-over hazard.

Hazard: The fuel tank filler neck may develop a crack at the base where the filler neck meets the fuel tank assembly. This may cause the neck to separate from the fuel tank assembly and allow fuel to escape from the tank, potentially creating a fire hazard.

Hazard: The front suspension A-frame can break or separate from the front wheel and cause a loss of steering ability, resulting in serious injury or death.

Hazard: These handlebar stems can crack or break, causing the bicycle rider to fall and suffer injuries.

Hazard: The fuel petcock inserts were made with incorrect material, that does not correctly bond the fuel tank and petcock insert, which could allow fuel leakage. If this occurs, a fire hazard with the possibility of injury and property damage could result.

Hazard: The rear brake shoe material could separate due to improper adhesive curing, adversely affecting rear braking performance.

Hazard: Vibration from the engine and driveline during long periods of high rpm usage could cause the rear master cylinder reservoir to agitate, resulting in brake fluid aeration. A small amount of air bubbles could enter the master cylinder, adversely affecting rear brake performance.

Hazard: The rear axle bearings may have not been sufficiently greased. This may cause a breaking of the bearing, which could make the ATV unstable. The operator could lose control of the vehicle, which could cause injury to the operator.

Hazard: The fuel tank used on some all-terrain vehicles could develop a fuel leak. If this occurs, a fire hazard, with the possibility of injury and property damage, could occur.

Hazard: The wheels of the scooter can break or become damaged, and users of the scooters can fall and suffer injuries.

Hazard: Water can enter the throttle lever case and freeze, causing the throttle lever to become stuck and fail to automatically return to the idle position when the rider releases the throttle. If the throttle lever does not automatically return to the idle position when the rider releases the throttle, the ATV will not slow down as the rider expects. The rider could lose control of the ATV and an accident resulting in injury or death could occur.

Hazard: The snowmobile wiring harness may be routed in a way that could disconnect the engine stop switch and the throttle safety switch connector. If this connector becomes unplugged, the engine stop and the throttle safety switches will no longer function. This could pose a possible crash hazard. However, the keyed ignition switch will continue to function and will shut down the vehicle when the key is in the OFF position. The thumb warmer and right-hand warmer could also become unplugged under these harness-routing conditions.

Hazard: The age recommendation warning label is missing. Children under 16 years old riding these adult-size ATVs can suffer serious injury or death.

Hazard: The frames on these bicycles can crack and fail during use, posing a risk of injury to riders.

Hazard: On some units, the nut which secures the front upper suspension arm pivot bolt could come loose during vehicle use. Continued use of the vehicle could allow the nut to come off, and the upper suspension A-arm pivot bolt to back partially out. This would result in a loss of steering control, and possibly cause the rider to crash and suffer injury or death.

Hazard: The seat posts may have been improperly manufactured, which could cause the seat post to fail prematurely. A failure could lead to a crack in the bicycle seat post, which may cause the rider to fall or crash.

Hazard: Metal-flange locking nuts securing the tie rod assemblies, integral to the steering system on the Youth ATV, can come loose. The resulting unstable steering condition could result in serious injury or death to a rider.