Consumer Product Recalls

Hazard: Unintended acceleration increases the risk of a crash.

Hazard: A loss of drive power increases the risk of a crash.

Hazard: A loss of drive power increases the risk of a crash.

Hazard: A short circuit in a high-voltage battery increases the risk of a fire.

Hazard: Incorrect tire inflation information can result in improperly inflated tires and cause tire failure, increasing the risk of a crash.

Hazard: A loss of outer brake pad function can extend the vehicle's stopping distance, increasing the risk of a crash.

Hazard: Headlight low beam failure can reduce visibility, increasing the risk of a crash.

Hazard: Headlight low beam failure can reduce visibility, increasing the risk of a crash.

Hazard: A loss of power steering assist can require greater steering effort, especially at low speeds, increasing the risk of a crash.

Hazard: Incorrectly adjusted headlights can reduce driver visibility or create a glare for oncoming traffic, increasing the risk of a crash.

Hazard: A slide-Out room that extends unexpectedly increases the risk of a crash.

Hazard: The Benadryl contains diphenhydramine, which must be in child-resistant packaging as required by the Poison Prevention Packaging Act. The packaging of the products is not child-resistant, posing a risk of poisoning if the contents are swallowed by young children.

Hazard: The folding mechanism can fail and cause the handlebars or stem to fold while the scooter is in use, posing a fall hazard to consumers.

Hazard: The recalled dressers are unstable if they are not anchored to the wall, posing serious tip-over and entrapment hazards that can result in injuries or death to children. The dressers violate performance and labeling requirements of the STURDY Act.

Hazard: The brew cup handle can forcefully eject during use, shattering the glass carafe and posing a burn and laceration hazard.

Hazard: The lithium-ion battery in the recalled power banks can overheat and ignite, posing fire and burn hazards to consumers.

Hazard: The recalled products can contain Pseudomonas species bacteria, including Pseudomonas oleovorans, an environmental organism found widely in soil and water. People with weakened immune systems or external medical devices who are exposed to the bacteria face a risk of serious infection that may require medical treatment. The bacteria can enter the body through the eyes or through a break in the skin. People with healthy immune systems are usually not affected by the bacteria.

Hazard: The engine control module (ECM) lower mount support could have broken in production and left a loose part inside the engine compartment, allowing it to enter the throttle body area and lead to a stuck throttle. This poses a crash hazard and risk of serious injuries or death.

Hazard: The recalled pool vacuum cleaner has a large current adapter that can overheat, posing burn and fire hazards.

Hazard: The skis can detach from the snowmobile, posing a crash hazard and risk of serious injury.

Hazard: Weight plates can dislodge from the dumbbell handle during use, posing an impact hazard to consumers.

Hazard: Catheter manufactured at the incorrect length.

Hazard: There is a potential design issue with the Z1 Offset Stem Inserter leading to fracturing of the distal tip.

Hazard: Increase in complaints concerning "pullwire" breakage that may result in the broken pullwire remaining in the anchor implant body after deployment.

Hazard: Their is a potential of fluid leakage from the centrifugal blood pump pump during the priming procedure or during clinical procedures.

Hazard: The DxI 9000 Access Immunoassay Analyzer wash wheel mixer may not spin freely within the idler pulley housing. When the problem occurs, the analyzer may generate a system event for a Wash Wheel Dispense Arm Spin Mixer Error that is displayed on the navigation bar in the User Interface. The analyzer enters the red system status and will generate a SYS flag. The tests that are in progress may be cancelled and may cause a delay in reporting patient results

Hazard: Due to an increase in complaints concerning foot tray pedal spring failing resulting in the pedal remaining pressed

Hazard: Multiple problems identified with the software version leading to various scanning and image issues, and unintended device movement.

Hazard: The potential for devices to fail their self-test as a result of prolonged exposure to extreme environments (temperature and/or humidity).

Hazard: The potential for devices to fail their self-test as a result of prolonged exposure to extreme environments (temperature and/or humidity).